Skyjack SJ3220/26 Scissor Lift
Details
Skyjack‘s SJ3220/26 DC Scissor Lifts are ideal for indoor work where accuracy and precision turns around sensitive material is critical.
- Equipment Type
- Aerial Lifts / New Scissor Lifts
Work Height:
SJ3220: 25’ 6” (7.77 m)
SJ3226: 31’ 7” (9.63 m)
Raised Platform Height:
SJ3220: 19’ 6” (5.95 m)
SJ3226: 25’ 7” (7.79 m)
Lowered Platform Height:
SJ3220: 39” (0.99 m)
SJ3226: 46” (1.17 m)
Overall Width:
32” (0.81 m)
Overall Length:
91.6” (2.32 m)
Weight:
SJ3220: 3,917 lbs (1,776 kg)
SJ3226: 4,190 lbs (1,900 kg)
Lift Time (With Rated Load):
SJ3220: 28 sec
SJ3226: 47 sec
Lower Time (With Rated Load):
SJ3220: 24 sec
SJ3226: 41 sec
Drive Speed (Stowed):
2.4 mph (3.9 km/h)
Drive Speed (Raised):
0.6 mph (1.0 km/h)
Maximum Drive Height:
Full Height
Capacity (overall):
SJ3220: 900 lbs (408 kg)
SJ3226: 500 lbs (227 kg)
- Drivable at full height
- Variable speed, rear two wheel hydraulic drive
- Dual holding brakes
- SKYCODED™ Color coded and numbered wiring system
- On-board visual interface with diagnostic capabilities
- Shroud style, impact resistant composite control box with extended cable
- Proportional controls for drive & lift functions
- Tilt sensor (3.5° x 1.5°)
- 3’ (0.91 m) Roll out extension deck
- 24V DC Power source
- Low voltage battery protection
- 25% Grade-ability
- Solid rubber, non-marking tires
- Pothole protection system
- 110V AC Outlet on platform with GFI
- 28 mph (12.5 m/s) Wind rating (SJ3226 to 18’ 6” (5.63 m))
- Tilt alarm with drive & lift cut-out
- All motion audible alarm
- Lanyard attachment points
- Operator horn
- Forklift pockets and tie down/lift lugs
- Overload sensing system
- Fold down hinged railing system
- Half height spring hinged entry gate
- Telematics ready
- 2-Year Gold Leaf Warranty (5-year structural warranty)
Details
Skyjack‘s SJ3220/26 DC Scissor Lifts are ideal for indoor work where accuracy and precision turns around sensitive material is critical.
- Equipment Type
- Aerial Lifts / New Scissor Lifts
